This is a Real-Size Photobooth 3D Model designed for event needs, rental businesses, and commercial installations. The model is created with realistic dimensions and practical construction in mind.

It features a main camera head unit, display screen housing, a solid support pole, and a functional base box. The structure is suitable for fabrication using metal or multiplex plywood, and the exterior finishing supports HPL laminate or paint coatings.

Included formats: SKP, OBJ, FBX, and STL, making the model ready for 3D visualization, product prototyping, CNC reference, and manufacturing planning.

1. Main Body & Head Unit

   • Material options: 1–1.2 mm sheet metal or 12 mm multiplex plywood.

   • For metal: CNC laser-cut panels, bend where required, weld lightly, then sand.

   • For wood: Cut with CNC router or manual cutting, assemble using screws + glue.

   • Camera hole and screen slot should match actual hardware dimensions.

2. Support Pole

   • Use steel hollow pipe Ø 2–3 inches or wooden/plywood tube reinforcement.

   • Attach firmly to the base using bolts or internal plates.

3. Base Box

   • Fabricate from sheet metal or multiplex plywood (15–18 mm recommended).

   • Add an internal weight (steel plate or concrete block) for stability.

   • Install rubber feet for non-slip use.

4. Finishing

   • Apply HPL laminate for a premium look, or smooth sand + apply paint (duco/matte).

   • Ensure all panels are coated evenly to avoid moisture absorption.

5. Assembly & Electronics

   • Assemble outer structure first.

   • Install LED light, camera module, and display panel after finishing is done.

   • Route wiring inside the pole for a clean setup.